Fully Automatic Mechanical Tray Former

Condition New
Category Case Erectors, Tray Erectors - Tray Formers
Manufacturer Wepackit
Model 300TF
Industry Automotive, Beverage, Brewery, Consumer Products, Dairy, Distillery, Food, Winery
Speed 35 CPM
Location North America

Fully Automatic Mechanical Tray Former

This Fully Automatic Mechanical Tray Former is a heavy duty tray former designed for sustained 3 shifts per day production. The 300TF is fully automatic, operating either on-demand or integrated to a fully automatic loading system. Smooth and consistent tray formation is achieved as tray vertical formation processes are supported by linear bearing bushings on dual 1-1/4” harden ground shafts.

Up to 35 cases per minute. Custom Solutions Available

With the Fully Automatic Top Case Closer and Taper a single flat blank is secured from the magazine and placed in the takeaway position. As a flighted chain transfers the blank to the erection position, the hot melt applicator applies adhesive to targeted inner minor tray corner tabs. Arriving to the forming position, the tray blank is gently driven through the forming section by the mandrel. Hot melt tack is achieved as the tray remains secured within the forming section until discharged by the next arriving tray. The formed and glued tray is then released on to the powered discharge conveyor.

300TF Tray Former
Speed Rating up to 35 cases per minute
Foot Print 36” x 72” (Standard) | 54” x 88” (XL Model)
Utilities - Air 220/3/60 NEMA 12 – 5CFM (80PSI)
Case Range Min (6"L x 5.5"W - Standard) (20"L x 8"W - XL)
Case Range Max (24"L x 18"W - Standard) (40"L x 27"W - XL)
Electrical 480/3/60

Features

  • Full stainless steel construction
  • Low level case magazine alert
  • Left or Right Hand operation
  • Erecting and sealing of tri-seal corrugated cartons

Do you have a Fully Automatic Mechanical Tray Former or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Fully Automatic Mechanical Tray Former to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

  • PHONE

    Sales:  (800) 215 7115
    US:  (484) 553 9086
    UK:  +44 (0) 0800 368 9086

  • MAILING ADDRESS

    P.O. Box 285
    Kutztown, PA 19530

  • EMAIL

    sales@sourcelinemachinery.com
    info@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)

    • This field is for validation purposes and should be left unchanged.
    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.
      available 2
      available 12
      Used SMI SK802T Tray Former Packer Shrink Wrap Bundler
      11
      Used Douglas Contour SPS 75 Shrink Packer
      11
      available 11
      Used SMI SK802T Tray Former Packer Shrink Wrap Bundler
      11
      Used KHS Kisters Innopack WP30 Wraparound Tray Packer
      10
      This site uses cookies. Some of them are essentials while other enhance your browsing experience.