SALES
(800) 215 7115
Rebuilt Bevcorp 72 Valve Can Filler with Angelus Seamer
Sold
| Condition | Production Ready, Rebuilt |
| Category | Beverage Fillers, Can Fillers, Can Seamers - Closers, Fillers - Filling Equipment, Rotary Fillers |
| Manufacturer | Angelus, Bevcorp, Crown |
| Model | 120L, Uniblend 72 |
| Industry | Beverage, Brewery |
| Speed | 1200 CPM |
| Location | North America |
| Stock Number | 1912-200527 |
Pristine Rebuilt Beverage Can Filler Set For Standard and Sleek Cans
Rebuilt Crown Bevcorp 72 Valve Filler with Angelus Seamer is painted cast steel and includes: Lift cylinder upholding mechanism, main drive gearbox, roller stanchion bearings and couplings were rebuilt and replaced. Stainless steel trip support ring with rebuilt opener and closer and new shift cam and brackets. In-feed spider drive gearbox, worm drive jackshaft, worm drive gearing, worm drive jack shaft brackets, and worm drive gearbox are rebuilt or replaced. All rubber goods, cam shaft housings, cam shafts, actuating levers and actuating lever shear washers are also replaced or rebuilt. This rebuilt 72V 26.5° valve can filler also comes with New stainless steel tubular common base (for Angelus 120L), New Can Transfer, New Stainless filler base pedestal and combining table, New Stainless Control Panel and HMI, New Allen Bradley Controls, Set up for air conveyor in-feed, New set of tip-less valves, New Stainless Lubrication Panel with Orsco set up. Also comes with New quick change stainless steel CIP cups (quarter turn snap on). Electrics 480V-3Ph-60Hz.
Unit consists of chucks and rolls for 202 end and body handling parts for 202/211 and 202/204 x 602. Available Now!
The Rebuilt Angelus 120L Can Seamer has been completely disassembled ; all existing paint is stripped from the castings. Castings were sandblasted and prepped for Epoxy Paint. All internal and external castings were inspected to ensure they meet OEM specifications. Seamer includes handling parts for 202/211 and 202/204 x 602 cans. All Crown can fillers for soft drinks are recognized world-wide for their durability, reliability and consistently high output at low operating cost. Crown can fillers are designed and built to be rugged and cost effective.
- Tooling for 202/211 + Sleek Can
- New Can Transfer
- New Set of Tip-less Valves
- New Stainless Common Base
- New Stainless Control Panel and HMI
- New Allen Bradley Controls
- New Stainless Lubrication Panel with Orsco
- New Stainless Filler Base
Crown Uni-Blend / Angelus 120L
| Filler Model | Uni-Blend 72 |
| Valves | 72 |
| Seamer Model | 120L |
| Seaming Heads | 12 |
| Speed Rating | 1200 cpm |
| Can Diameter Min/Max | 50.8 - 81mm |
| Can Height Min/Max: | 41.3 - 203.2mm |
| Tooling | 202/211, 202/204x602 |
| Electric | 480V-3Ph-60Hz-100amp |
| Air | 100cfm-80psi |
Filler Overhead View
Filler Linear View
Do you have a Used Crown Bevcorp 72 Valve Can Filler with Angelus 120L Can Seamer or Similar Equipment?
Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used Crown 72 Valve Can Filler with Angelus 120L Seamer to entire manufacturing facility liquidations.
Click the button below to let us know what you have available.
*** DISCLAIMER ***
This equipment is marketed by Sourceline Machinery to facilitate its resale by the current owner, user, the original equipment manufacturer (OEM), or third parties (e.g., banks, investment firms, liquidation managers). The prospective buyer or potential buyer is solely responsible for inspecting, testing, and ensuring the equipment complies with all applicable safety, environmental, and operational standards prior to resale, operation, or export. This includes, but is not limited to, adherence to OSHA (Occupational Safety and Health Administration) regulations (e.g., machine guarding, electrical safety), EPA (Environmental Protection Agency) requirements (e.g., refrigerant handling, emissions), state and local laws (e.g., California Proposition 65), and international regulations such as GPSR/CE marking (EU), UKCA marking (UK), FEFTA (Japan), and applicable local standards worldwide (e.g., AS/NZS in Australia, CSA in Canada, China RoHS, Brazil Inmetro). Sourceline Machinery provides no guarantees whatsoever regarding the equipment’s compliance, condition, or suitability for use, resale, or export. Prospective buyers or potential buyers must review manuals or documentation provided by the seller (e.g., current owner, OEM, or third party), perform thorough safety and compliance assessments, and secure any necessary certifications or repairs before any use or transaction. This equipment is subject to sale without prior notice, as transactions may occur directly between sellers and buyers. Listed machinery may not reflect current inventory due to delays in updating listings or receiving timely notifications from sellers. This listing is for informational purposes only, does not imply a direct sale or warranty by Sourceline Machinery, and users assume all risks associated with equipment inquiries or transactions. Please refer to our Privacy Policy for information on data collection and use.
PHONE
Sales: (800) 215 7115
EMAIL
sales@sourcelinemachinery.com
OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
