SALES
(800) 215 7115
Used 2017 SIPA XFORM 350 Ton Preform Injection Molder
2Video
Sold
| Condition | Used |
| Category | Injection Molder |
| Manufacturer | SIPA |
| Model | XFORM 350 |
| Year | 2017 |
| Industry | Beverage |
| Location | North America |
| Stock Number | 1912-200831 |
72 Cavity Molds – Producing 1881 28mm Neck Finish Preforms
The Used 2017 SIPA XFORM 350 Ton Preform Injection Molder has been engineered to deliver the highest platform robustness along with an unprecedented running efficiency. XFORM platforms use state-of-the-art double-toggle clamp units designed to guarantee virtually no vibrations even at ultra-fast cycle times dramatically reducing maintenance costs. Molds are easily changed as post-mold cooling designs allow for a very wide access area during changeovers. This system uses the classical configuration of a continuously-running extruder (electric motor drives) feeding a shooting pot with optimized plasticating screws to help keep acetaldehyde levels low.
SIPA 72 cavity mold to make 21.7 gram preforms with 1881 28 mm neck finish.
- Outstanding Reliability
- High Flexibility
- Excellent Quality
- Low Energy Cost
SIPA XFORM 350
| Cavities | 72 |
| Max Preform Thread | 43mm |
| Z diameter | 48 |
| Rows x Columns | 12 x 6 |
| Pitch V x H | 63,5 x 160 |
| Model | 72 60 x 140 |
| Generation | 3 |
| Gate Diameter | 4 mm |
| HH Weight Kg | 2457 |
| Air Pressure | 8-10 bar |
| Material | PET |
Do you have a SIPA XFORM 350 Ton Preform Injection Molder or Similar Equipment?
Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used 2017 SIPA XFORM 350 Ton Preform Injection Molder to entire manufacturing facility liquidations.
Click the button below to let us know what you have available.
*** DISCLAIMER ***
This equipment is marketed by Sourceline Machinery to facilitate its resale by the current owner, user, the original equipment manufacturer (OEM), or third parties (e.g., banks, investment firms, liquidation managers). The prospective buyer or potential buyer is solely responsible for inspecting, testing, and ensuring the equipment complies with all applicable safety, environmental, and operational standards prior to resale, operation, or export. This includes, but is not limited to, adherence to OSHA (Occupational Safety and Health Administration) regulations (e.g., machine guarding, electrical safety), EPA (Environmental Protection Agency) requirements (e.g., refrigerant handling, emissions), state and local laws (e.g., California Proposition 65), and international regulations such as GPSR/CE marking (EU), UKCA marking (UK), FEFTA (Japan), and applicable local standards worldwide (e.g., AS/NZS in Australia, CSA in Canada, China RoHS, Brazil Inmetro). Sourceline Machinery provides no guarantees whatsoever regarding the equipment’s compliance, condition, or suitability for use, resale, or export. Prospective buyers or potential buyers must review manuals or documentation provided by the seller (e.g., current owner, OEM, or third party), perform thorough safety and compliance assessments, and secure any necessary certifications or repairs before any use or transaction. This equipment is subject to sale without prior notice, as transactions may occur directly between sellers and buyers. Listed machinery may not reflect current inventory due to delays in updating listings or receiving timely notifications from sellers. This listing is for informational purposes only, does not imply a direct sale or warranty by Sourceline Machinery, and users assume all risks associated with equipment inquiries or transactions. Please refer to our Privacy Policy for information on data collection and use.
PHONE
Sales: (800) 215 7115
EMAIL
sales@sourcelinemachinery.com
OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
