Used 30HL Flash Pasteurization System

SOLD
Condition
Category Flash Pasteurizers, Pasteurizers
Manufacturer IDD
Model FP2
Year 2012
Industry Beverage, Brewery
Capacity 30HL
Location North America

Used 30HL Flash Pasteurization System

The Used 30HL Flash Pasteurization System was previously feeding pasteurized beer into an integral Sterile Beer Tank (SBT) to supply the keg filling line via a beer boost pump controlled by the keg filler process. This stainless steel skid mounted beer pasteurization system is comprised of a three section plate heat exchanger with 316 plates and EPDM gaskets. The PHE machine frame is 304 stainless steel construction and is fitted with 1” Tri-clover sanitary clamp connections. The unit has a Footprint of 111” x 84” x 96″. The hot water recirculating system has a 304 stainless steel vessel housing a 304 stainless steel steam injector with temperature control valve, probe and stainless steel pocket, 1 HP hot water recirculating pump with TEFC 575-3-60Hz motor.

Unit dimensions: 111″ x 84″ x 96″. Available Now!

The Used 30HL Flash Pasteurization System comes with (1) 10HL 304 stainless steel, glass bead, satin finish, Sterile Beer Tank (SBT) and (1) 5HL 304 stainless steel, glass bead, satin finish, CIP/SIP/sterile liquor tank.  The system control and valving consist of automatic IDD butterfly valves, back pressure control valves, Allen Bradley “MicroLogix” PLC and PanelView Plus 1000 HMI, Ashcroft or equal sanitary dial type pressure gauges and thermometers. 304 stainless tube and supports, glass bead, satin finish. Pasteurizer NEMA 4 (IP65) control console, UL/CUL certified, Frame mounted and contain all necessary instrumentation and push button controls, mimic indication, pneumatics, transformers, PSU, alarms and motor starters.

Stainless steel skid mounted beer pasteurization system

Comprising a three section plate heat exchanger with 316 plates and EPDM gaskets. The PHE machine frame is 304 stainless steel construction and is fitted with 1” Tri-clover sanitary clamp connections. Approx. Footprint 102” x 75”

10 Hl, 304 stainless steel, glass bead, satin finish, Sterile Beer Tank (SBT)

Has a safe working pressure of 1 BAR, anti-vacuum/pressure relief valve, CIP spray ball, automatic interface valves and level indication and control system. The SBT is complete with a top manway, sight glasses, sample valve and CO2 inlet manifold.

5 Hl, 304 stainless steel, glass bead, satin finish, CIP/SIP/sterile liquor tank

Comes with CIP spray ball and level indication/control system. The CIP/SIP tank is complete with a top manway, sample valve, steam heating coil and control, level control and dosing system.

25 to 30 HL/HR, FLASH PASTEURIZATION (FP2) SYSTEM
Dimensions 111"L x 84"W x 96"H
Max inlet Pressure 15 Bar
Approx total heat load 753,000 BTU/Hr.
Approx recovered heat load 690,000 BTU/Hr.
Electrical 460V - 3PH - 60Hz

Do you have a IDD 30HL Flash Pasteurization System or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this IDD 30HL Flash Pasteurization System to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

  • PHONE

    Sales:  (800) 215 7115
    US:  (484) 553 9086
    UK:  +44 (0) 0800 368 9086

  • MAILING ADDRESS

    P.O. Box 285
    Kutztown, PA 19530

  • EMAIL

    sales@sourcelinemachinery.com
    info@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)

    • This field is for validation purposes and should be left unchanged.
    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.