Used Uni-Pak 6 x 22 Stainless Bottle Warmer – Cooling Tunnel

SOLD
Condition Used
Category Cooling Tunnels, Tunnel Warmers
Manufacturer Uni-Pak
Model 622LH-EX
Industry Beverage, Brewery, Food, Nutraceutical
Location North America

Used Uni-Pak 6 x 22 Stainless Bottle Warmer – Cooling Tunnel

This Used Uni-Pak 6 x 25 Stainless Bottle Warmer – Cooling Tunnel is manufactured from 7 gage (3/16″) stainless steel, with a UHMW belt carryway and spray manifolds constructed from stainless steel and brass. The unit features high volume spray nozzles and centrifugal spray pumps with high efficiency motors.  Designed for modular assembly and can be easily upgraded in length via an expansion joint to suit the needs of your operation.

Overall dimensions: 27’ Long x 10’-2” Wide x 80” High. Available Now

6’ Wide x 22’ Long Belt Size  |  Stainless Construction  |  Plastic Intralox Type Belting  |  (3) Centrifugal Pumps  |  12” Max product height clearance  |  Stainless Strainer / Filter Baskets  |  Stainless overhead spray bars  |  Stainless Removeable Top Covers  |  Conical Slope Bottom Design  |  SEW 1 HP Eurodrive for cooler belt  |  CIP capable  |  14” x 6’ Long Stainless Infeed Conveyor  |  14” x 6’ Long Stainless Discharge Conveyor  |  Temperature Controller  |  Temperature Sensors  |  RTD’s  |  43” Elevation  |  Stainless Air  |  Knife / Blower  |  Stainless Exhaust Duct  |  Stainless floor levelers  |  Stainless Free-Standing Electrical Panel  |  VFAC Speed Controllers  |  Multiple E-Stops  |  Operator interface controls

  • Very Good Condition
  • Stainless Construction
  • Operator interface controls
  • (2) VFAC Speed Controllers
  • Stainless floor levelers
  • Available Immediately
Uni-Pak 6' x 22' 622LH-EX
Overall Dimensions 27’ Long x 10’-2” Wide x 80” High (with blower removed for shipping)
Max Product Height Clearance 12"
Belt Size 6’ Wide x 22’ Long
Stainless Infeed Conveyor 14” x 6’ Long
Stainless Discharge Conveyor 14” x 6’ Long
Electrical 460 Volt / 50/60 HZ. / 3 Phase
Serial 622LH-EX

CUSTOM TUNNEL WARMER / COOLER REQUEST

    • ex. beer, csd, pickles, etc.
    • ex. 250bpm
    • If yes please describe in the comments section

    Do you have a Used Uni-Pak 6 x 22 Stainless Bottle Warmer - Cooling Tunnel or Similar Equipment?

    Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used Uni-Pak 6 x 22 Stainless Bottle Warmer – Cooling Tunnel to entire manufacturing facility liquidations.

    Click the button below to let us know what you have available.

    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.
      • PHONE

        Sales:  (800) 215 7115
        US:  (484) 553 9086
        UK:  +44 (0) 0800 368 9086

      • EMAIL

        sales@sourcelinemachinery.com
        info@sourcelinemachinery.com

      • MAILING ADDRESS

        P.O. Box 285
        Kutztown, PA 19530

      • OFFICE HOURS

        Mon – Fri (9am – 5pm EST)
        Sat & Sun (By Appointment)

        • This field is for validation purposes and should be left unchanged.
        available 3
        Used Uni-Pak 6 x 22 Stainless Bottle Warmer – Cooling Tunnel
        12
        available 3
        Used Uni-Pak 6 x 22 Stainless Bottle Warmer – Cooling Tunnel
        12
        available 6
        Used Krones Sander Hansen Pasteurizer Tunnel
        12
        1
        SPECIAL
        This site uses cookies. Some of them are essentials while other enhance your browsing experience.