Used Uni-Pak 6 x 25 Stainless Bottle Warmer – Cooling Tunnel

Condition Used
Category Cooling Tunnels, Tunnel Warmers
Manufacturer Uni-Pak
Model 625LH-EX
Industry Beverage, Brewery, Food, Nutraceutical
Location North America
Stock Number TE181019

Used Uni-Pak 6 x 25 Stainless Bottle Warmer – Cooling Tunnel

This Used Uni-Pak 6 x 25 Stainless Bottle Warmer – Cooling Tunnel is manufactured from 7 gage (3/16″) stainless steel, with a UHMW belt carryway and spray manifolds constructed from stainless steel and brass. The unit features high volume spray nozzles and centrifugal spray pumps with high efficiency motors.  Designed for modular assembly and can be easily upgraded in length via an expansion joint to suit the needs of your operation.

Overall dimensions: 31’ Long x 99” Wide x 80” High. Available Now

6’ Wide x 25’ Long Belt Size  |  Stainless Construction  |  Plastic Intralox Type Belting  |  (3) Centrifugal Pumps  |  14” Max product height clearance  |  Stainless Strainer / Filter Baskets  |  Stainless overhead spray bars  |  Stainless Removeable Top Covers  |  Conical Slope Bottom Design  |  SEW 1 HP Eurodrive for cooler belt  |  CIP capable  |  Temperature Controller  |  Temperature Sensors  |  RTD’s  |  43” Elevation  |  Stainless Air  |  Knife / Blower  |  Stainless Exhaust Duct  |  Stainless floor levelers  |  Stainless Free-Standing Electrical Panel  |  VFAC Speed Controllers  |  Multiple E-Stops  |  Operator interface controls

  • Very Good Condition
  • Stainless Construction
  • Operator interface controls
  • (2) VFAC Speed Controllers
  • Stainless floor levelers
  • Available Immediately
Uni-Pak 6' x 25' 625LH-EX
Overall Dimensions 31’ Long x 99” Wide x 80” High
Belt Size 6’ Wide x 25’ Long
Electrical 460 Volt / 50/60 HZ. / 3 Phase
Serial 625LH-EX

Do you have a Used Used Uni-Pak 6' x 25' Stainless Bottle Warmer / Cooling Tunnel or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used Uni-Pak 6′ x 25′ Stainless Bottle Warmer / Cooling Tunnel to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

*** DISCLAIMER ***

This equipment is marketed by Sourceline Machinery to facilitate its resale by the current owner, user, the original equipment manufacturer (OEM), or third parties (e.g., banks, investment firms, liquidation managers). The prospective buyer or potential buyer is solely responsible for inspecting, testing, and ensuring the equipment complies with all applicable safety, environmental, and operational standards prior to resale, operation, or export. This includes, but is not limited to, adherence to OSHA (Occupational Safety and Health Administration) regulations (e.g., machine guarding, electrical safety), EPA (Environmental Protection Agency) requirements (e.g., refrigerant handling, emissions), state and local laws (e.g., California Proposition 65), and international regulations such as GPSR/CE marking (EU), UKCA marking (UK), FEFTA (Japan), and applicable local standards worldwide (e.g., AS/NZS in Australia, CSA in Canada, China RoHS, Brazil Inmetro). Sourceline Machinery provides no guarantees whatsoever regarding the equipment’s compliance, condition, or suitability for use, resale, or export. Prospective buyers or potential buyers must review manuals or documentation provided by the seller (e.g., current owner, OEM, or third party), perform thorough safety and compliance assessments, and secure any necessary certifications or repairs before any use or transaction. This equipment is subject to sale without prior notice, as transactions may occur directly between sellers and buyers. Listed machinery may not reflect current inventory due to delays in updating listings or receiving timely notifications from sellers. This listing is for informational purposes only, does not imply a direct sale or warranty by Sourceline Machinery, and users assume all risks associated with equipment inquiries or transactions. Please refer to our Privacy Policy for information on data collection and use.

  • PHONE

    Sales:  (800) 215 7115

  • EMAIL

    sales@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)