2018 28 Valve CSD Beverage Bottling Line

Condition Remanufactured, Used
Category Complete Lines
Manufacturer Bevcorp, Crown, CSI, In-Line
Year 2018
Industry Beverage, Brewery
Location North America
Stock Number 1902-201105

2018 28 Valve CSD Beverage Bottling Line

The 2018 28 Valve CSD Beverage Bottling Line was initially delivered and installed in 2018. The used beverage bottling line was previously running Kombucha on 8oz glass bottles with 38 mm plastic screw caps and 16oz glass bottles with 28mm plastic screw caps. The system comes with a Bevcorp-Crown 28 Valve filler with 6 head CSI capper and Paradigm Inline Pressure Sensitive Labeling. 

Previously Running Kombucha on 8oz glass 38mm plastic screw caps and 16oz glass 28mm plastic screw caps

This 2018 28 Valve CSD Beverage Bottling Line is capable of running both glass and pet bottles with plastic screw cap applications. The line was previously running lower volumes and the previous owner swiftly out grew the capacity of the line. Equipment is in very good condition and is available now. 

In-Feed Table

Make: In-Line
Model: 42D
Year: 2018

The Rotary Product Table is powered by a 1/8 hp variable speed DC motor. The separate on/off control button allows it to be completely independent from the other machines which makes it a very versatile addition to any product line.

Monoblock Filler - Capper

Filler OEM : Bevcorp (Crown)
Filling Valves : 28
Capper OEM : CSI
Capping Heads : 6
Year : 2018 (RM)

The Crown 28 Valve Bottle Filler with 6 Head Capper is a versatile soft drink bottle filler that demonstrates proven reliability at high speeds for high profitability. Safe, dependable bottle handling, combined with ease of operation and maintenance, provides smooth, efficient output. Crowns “battleship construction, with heavy cast iron base, housing, cylinder support and support pedestal, helps to promote outstanding performance under “all­-go” conditions for years to come.

Previously running 8oz glass with 38mm plastic screw caps and  16oz glass with 28mm plastic screw caps

The Crown 28 Valve Bottle Filler with 8 Head Capper comes with change parts for 8oz glass bottles with 38mm plastic closure and 16oz glass bottles with 28mm plastic closures. Includes CSI cap-in-head rotary 6 head turret mounted capper. All Crown can fillers for soft drinks are recognized world-wide for their durability, reliability and consistently high output at low operating cost. Crown can fillers are designed and built to be rugged and cost effective.

Air Knife Assembly

Neckband Sleever

Make: Pharmafill
Model: NB1
Year: 2018

Neck bander was used to apply tamper evident neck sleeves to 8 and 16 oz bottles with 28 and 38mm caps.

Tabletop Conveyor System

Bottle Rinser

Make: In-Line
Model: RS-189
Year: 2018

Cap Blower

Labeler & Coder

Make: In-Line
Model: 700
Year: 2018

The Inline Paradigm 700 Pressure Sensitive Labeler & Coder a fully automatic label applicator capable of applying labels to a variety of products. Label application can be from the top down, bottom-up, or both. Products to be labeled are sensed as they pass a photo-eye. The photo-eye initiates a signal that is transmitted to the PLC. After a fully adjustable delay, the label is dispensed onto the passing product. For flat panels a wipe brush completes label application by wiping down the label onto the product. Controls consist of a main power switch, and the touchscreen operator interface which provides information and access to the label delay, label gap delay, batch count, speeds and more. The system also includes a hot stamp coder. 

Previously running 8oz and 16oz glass bottles at speeds of at least 50bpm. 

Heat Tunnel

Make: Marburg
Model: GR-6000
Year: 2018

Previously used to shrink tamper evident bands on top of glass bottles with 28mm and 38mm closures.

In-Feed Table

Make: In-Line
Model: 2 x 3
Year: 2018

These high-quality accumulation tables are constructed from aircraft-grade aluminum and stainless steel. Parts are finished with a durable stainless-steel coating. Standard tables are powered by an independent, variable speed DC motor that drives the conveyor chain slightly faster than our labelers. Each table is controlled by an independent on/off push button.

Do you have a Used 2018 28 Valve CSD Beverage Bottling Line or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used 2018 28 Valve CSD Beverage Bottling Line to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

  • PHONE

    Sales:  (800) 215 7115
    US:  (484) 553 9086
    UK:  +44 (0) 0800 368 9086

  • MAILING ADDRESS

    P.O. Box 285
    Kutztown, PA 19530

  • EMAIL

    sales@sourcelinemachinery.com
    info@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)

    • This field is for validation purposes and should be left unchanged.
    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.
      available 10
      2011 Krones PET Water Bottling Line
      15
      Used Complete 700BPM Water Bottling Line
      13
      1
      SALE PENDING
      available 31
      2011 Krones PET Water Bottling Line
      15
      2015 Krones PET CSD Bottling Line
      13
      available 15
      2015 Krones PET CSD Bottling Line
      13
      Used Complete 700BPM Water Bottling Line
      13
      1
      SALE PENDING
      This site uses cookies. Some of them are essentials while other enhance your browsing experience.