Used DOUGLAS 50 Cycle Tray Shrink Wrapper

SOLD
Condition
Category Bundlers, Shrink Wrap Equipment, Shrink Wrappers, Wrappers - Wrapping Equipment
Manufacturer Douglas
Model M50 SR7-1233
Year 2005
Industry Beverage, Brewery, Consumer Products, Dairy, Distillery, Food, Nutraceutical
Speed 50 Cycles / Min
Location North America

Used DOUGLAS 50 Cycle Tray Shrink Wrapper

The Used DOUGLAS 50 Cycle Tray Shrink Wrapper model M50 has the newer SR7-1233 Contour Tunnel. It has a single roll system designed to wrap up to 50 cycles per minute with capability to cut and wrap film thickness from 1.5 to 2.25 mil. Non-printed polyethylene film 24″ maximum width. The Product size range(outside dimension) is 4 3/4″ to 9 1/2″ in direction of travel, 2 5/8″ to 3 5/8″ in vertical direction, 14 1/4″ to 14 1/4″ across the conveyor.

Single roll system designed to wrap up to 50 cycles per minute with capability to cut and wrap film thickness from 1.5 to 2.25 mil.

Reap the benefits of aesthetically pleasing film wrapped pad, u-board, or film only products with the Douglas Contour Multi-wrapper. These scalable solutions also offer other patented and patent-pending features for quick and simple product size changes.

  • Temperature Controllers
  • Servo Driven Overwrap
  • Single Roll Film Application
  • Bottom Overlap Wrapping
  • Product Detection
  • Low Film Alarm
SPECIFICATIONS
Drive Servo Motors
Speed Up to 50 cycles/minute
Film rolls: up to 20" in diameter with 3" core
Electrical 480V 3Ph 60Hz
Air Consumption 90 psi
PRODUCT SIZE RANGE
In Direction of Travel 4-3/4" - 9-1/2"
In Vertical Direction 2-5/8" - 3-5/8"
Across Conveyor 14-1/4" - 14-1/4"

Equipment Features

  • High Efficiency Heat Source
  • Maximizing Speed and Efficiency
  • Efficient Pack-Pattern Collating and Loading
  • Flexible, Low Pressure Conveying and Product Handling

Equipment Highlights

  • Bottom Overlap Wrapping
  • Product Detection
  • Low Film Alarm
  • Temperature Controllers
  • Servo Driven Overwrap
  • Single Roll Film Application

CUSTOM SHRINK WRAPPER & BUNDLER REQUEST

    • If yes please describe in the comments section

    Do you have a Used DOUGLAS 50 Cycle Tray Shrink Wrapper or Similar Equipment?

    Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used DOUGLAS 50 Cycle Tray Shrink Wrapper to entire manufacturing facility liquidations.

    Click the button below to let us know what you have available.

    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.
      • PHONE

        Sales:  (800) 215 7115
        US:  (484) 553 9086
        UK:  +44 (0) 0800 368 9086

      • EMAIL

        sales@sourcelinemachinery.com
        info@sourcelinemachinery.com

      • MAILING ADDRESS

        P.O. Box 285
        Kutztown, PA 19530

      • OFFICE HOURS

        Mon – Fri (9am – 5pm EST)
        Sat & Sun (By Appointment)

        • This field is for validation purposes and should be left unchanged.