Rebuilt Crown Bevcorp 72 Valve Filler with Angelus Seamer

SOLD
Condition Production Ready, Rebuilt
Category Beverage Fillers, Can Fillers, Can Seamers - Closers, Fillers - Filling Equipment, Rotary Fillers
Manufacturer Angelus, Bevcorp, Crown
Model 120L, Uniblend 72
Industry Beverage, Brewery
Speed 1200 CPM
Location North America
Stock Number 1912-200527

Rebuilt Crown Bevcorp 72 Valve Filler with Angelus Seamer

Rebuilt Crown Bevcorp 72 Valve Filler with Angelus Seamer is painted cast steel and includes: Lift cylinder upholding mechanism, main drive gearbox, roller stanchion bearings and couplings were rebuilt and replaced. Stainless steel trip support ring with rebuilt opener and closer and new shift cam and brackets. In-feed spider drive gearbox, worm drive jackshaft, worm drive gearing, worm drive jack shaft brackets, and worm drive gearbox are rebuilt or replaced. All rubber goods, cam shaft housings, cam shafts, actuating levers and actuating lever shear washers are also replaced or rebuilt. This rebuilt 72V 26.5° valve can filler also comes with New stainless steel tubular common base (for Angelus 120L), New Can Transfer, New Stainless filler base pedestal and combining table, New Stainless Control Panel and HMI, New Allen Bradley Controls, Set up for air conveyor in-feed, New set of tip-less valves, New Stainless Lubrication Panel with Orsco set up. Also comes with New quick change stainless steel CIP cups (quarter turn snap on). Electrics 480V-3Ph-60Hz.

Unit consists of chucks and rolls for 202 end and body handling parts for 202/211 and 202/204 x 602. Available Now!

The Rebuilt Angelus 120L Can Seamer has been completely disassembled ; all existing paint is stripped from the castings. Castings were sandblasted and prepped for Epoxy Paint. All internal and external castings were inspected to ensure they meet OEM specifications. Seamer includes handling parts for 202/211 and 202/204 x 602 cans. All Crown can fillers for soft drinks are recognized world-wide for their durability, reliability and consistently high output at low operating cost. Crown can fillers are designed and built to be rugged and cost effective.

  • Tooling for 202/211 + Sleek Can
  • New Can Transfer
  • New Set of Tip-less Valves
  • New Stainless Common Base
  • New Stainless Control Panel and HMI
  • New Allen Bradley Controls
  • New Stainless Lubrication Panel with Orsco
  • New Stainless Filler Base
Crown Uni-Blend / Angelus 120L
Filler Model Uni-Blend 72
Valves 72
Seamer Model 120L
Seaming Heads 12
Speed Rating 1200 cpm
Can Diameter Min/Max 50.8 - 81mm
Can Height Min/Max: 41.3 - 203.2mm
Tooling 202/211, 202/204x602
Electric 480V-3Ph-60Hz-100amp
Air 100cfm-80psi

Do you have a Used Crown Bevcorp 72 Valve Can Filler with Angelus 120L Can Seamer or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used Crown 72 Valve Can Filler with Angelus 120L Seamer to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

  • PHONE

    Sales:  (800) 215 7115
    Main:  (484) 553 9086

  • MAILING ADDRESS

    P.O. Box 285
    Kutztown, PA 19530

  • EMAIL

    sales@sourcelinemachinery.com
    info@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)

    • This field is for validation purposes and should be left unchanged.
    • PHONE

      Sales:  (800) 215 7115
      Main:  (484) 553 9086

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.

      Other Machinery You Might Be Interested In