Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer

Condition Used
Category Beverage Fillers, Can Fillers, Can Seamers - Closers, Rotary Fillers
Manufacturer Angelus, Barry Wehmiller, Bevcorp, Crown
Model 40-F.T.69, 61h
Industry Beverage, Brewery
Speed 575 CPM
Location North America
Stock Number 0616-230912

Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer

This Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer was previously running 12oz sleek cans with 202 ends at 300 cpm. Capabilities range in speeds up to 575 cans per minute depending on the application. 40 valve can filler and 6 Spindle Seamer are both set for 202 ends and are on a stainless steel common base. The Angelus 61h Seamer and Crown 40 Filler had scheduled maintenance performed regularly.

Previously running 202 x 204.5 sleek cans at 300 cpm, capable of up to 575 cpm. Available Now

The Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer setup is optimized for 12oz. Sleek cans with 202 lids, with chucks and rolls in excellent condition for seamless canning operations. Featuring an advanced Allen Bradley MicroLogix PLC, the control panel provides precise control and monitoring capabilities. Additionally, a dedicated lubrication panel is included to ensure continuous performance. The seamer is equipped with an operator control station for user-friendly operation. Notably, the equipment includes a Barry Wehmiller Automatic Rotofeeder Lid Fed System for the can lids, streamlining lid placement and enhancing overall productivity. The setup is further strengthened by a NEW Stainless Steel Base Frame, enhancing durability and stability. This equipment was last used for packaging coffee-style drinks at a speed of 300 cans per minute and has been fully rebuilt before its previous service, assuring reliability and top-quality production.

  • Tooling for 202 ends / sleek body
  • Stainless Steel Common Base
  • Plexiglas safety guarding
  • Fleetwood Systems Can Lid Loader
  • Lube Panel – Lube System
  • Allen-Bradley MicroLogix 1500 Processor
Crown 40 Valve Can Filler
Manufacturer Crown
40-F.T.69 Over 575 cpm (12oz U.S.)
Filling Valves 40
Angelus 61h Seamer
Manufacturer Angelus
61h 600 cpm (dia 50.8 - 108mm) (ht 41.3 - 203.2mm)
Seaming Heads 6

Do you have a Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used Bevcorp Crown 40 Valve Can Filler with Angelus 61H Seamer to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

*** DISCLAIMER ***

This equipment is marketed by Sourceline Machinery to facilitate its resale by the current owner, user, the original equipment manufacturer (OEM), or third parties (e.g., banks, investment firms, liquidation managers). The prospective buyer or potential buyer is solely responsible for inspecting, testing, and ensuring the equipment complies with all applicable safety, environmental, and operational standards prior to resale, operation, or export. This includes, but is not limited to, adherence to OSHA (Occupational Safety and Health Administration) regulations (e.g., machine guarding, electrical safety), EPA (Environmental Protection Agency) requirements (e.g., refrigerant handling, emissions), state and local laws (e.g., California Proposition 65), and international regulations such as GPSR/CE marking (EU), UKCA marking (UK), FEFTA (Japan), and applicable local standards worldwide (e.g., AS/NZS in Australia, CSA in Canada, China RoHS, Brazil Inmetro). Sourceline Machinery provides no guarantees whatsoever regarding the equipment’s compliance, condition, or suitability for use, resale, or export. Prospective buyers or potential buyers must review manuals or documentation provided by the seller (e.g., current owner, OEM, or third party), perform thorough safety and compliance assessments, and secure any necessary certifications or repairs before any use or transaction. This equipment is subject to sale without prior notice, as transactions may occur directly between sellers and buyers. Listed machinery may not reflect current inventory due to delays in updating listings or receiving timely notifications from sellers. This listing is for informational purposes only, does not imply a direct sale or warranty by Sourceline Machinery, and users assume all risks associated with equipment inquiries or transactions. Please refer to our Privacy Policy for information on data collection and use.

  • PHONE

    Sales:  (800) 215 7115

  • EMAIL

    sales@sourcelinemachinery.com

  • OFFICE HOURS

    Mon – Fri (9am – 5pm EST)
    Sat & Sun (By Appointment)

Other Machinery You Might Be Interested In