SALES
(800) 215 7115
Used MicroBlend Blending System
SOLD
Sold
| Condition | |
| Category | Mix Processors |
| Manufacturer | Bevcorp, MicroBlend |
| Model | MicroBlend |
| Year | 2001 |
| Industry | Beverage |
| Location | North America |
| Stock Number | 1902-16035-02 |
This Used Microblend Blending System reduces oxygen and nitrogen levels in the blended product. Product can now be achieved with low parts-per-billion levels of O2 and N2. Deaeration occurs without the use of water deaeration. Reduced processing hardware; vacuum pumps, vessels and membranes no longer needed. Reduced blender cost, operating cost, and a simpler process. Less volatile product at the filler; improves operating speed and temperature requirements. Deaeration occurs in CIP loop; improves Micro issues.
Includes 500 gallon deaerator and IFIX latest generation HMI control system. Available Now!
The Used Microblend Carbonated Beverage Blending System saves money on changeovers in two ways. First, when water is used to push syrup to the blend unit; the MicroBlend blending system decreases the amount of water proportional to the lowering syrup brix until the blending rate cannot be maintained and automatically shuts down. All blended product in the system is at standard and can be used with maximum syrup yields.
- Reduces downtime
- Virtually Eliminates losses
- Improves Product Quality
- Limits CO2 waste
- Variable blend rate
- Extremely accurate proportioning
Production Specifications
| Product Type | Hot Fill & Cold Fill (Still Products) |
| Bottle Sizes | diameter (1440 to 3600mm) |
| Rated Voltage | 460/266v |
Features
- Reduces Oxygen and Nitrogen Levels in the Blended Product
- Deaeration Occurs w/o the use of water Deaeration
- Reduced Processing Hardware
- Less Volatile Product at the Filler
- Deaeration Occurs in CIP Loop
- Carbonated Soft Drink Blenders Offer Optional C02 and N2 Injection with water deaeration and product chilling.
- Hot Fill and Non-Carbonated Blenders are Manufactured w/o the Gas Injection, Deaeration, and Product Chilling.
- Multi-Stream Blenders Enable the Addition of Multiple Streams of Flavors and Ingredients to the Finished Product.
Highlights
- Reduces downtime
- Virtually Eliminates losses
- Improves Product Quality
- Limits CO2 waste
- Variable blend rate
- Extremely accurate proportioning
CUSTOM BEVERAGE PROCESSING SYSTEM REQUEST
Used MicroBlend Blending System
Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used MicroBlend Blending System to entire manufacturing facility liquidations.
Click the button below to let us know what you have available.
PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086MAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530
EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.comOFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.comMAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
