Used Microblend Carbonated Beverage Blending System

Condition Used
Category Mix Processors
Manufacturer Bevcorp, MicroBlend
Model MicroBlend
Year 2001
Industry Beverage
Location North America

Used Microblend Carbonated Beverage Blending System

This Used Microblend Carbonated Beverage Blending System reduces oxygen and nitrogen levels in the blended product. Product can now be achieved with low parts-per-billion levels of O2 and N2. Deaeration occurs without the use of water deaeration. Reduced processing hardware; vacuum pumps, vessels and membranes no longer needed. Reduced blender cost, operating cost, and a simpler process. Less volatile product at the filler; improves operating speed and temperature requirements. Deaeration occurs in CIP loop; improves Micro issues.

Includes 500 gallon deaerator and IFIX latest generation HMI control system. Available Now!

The Used Microblend Carbonated Beverage Blending System saves money on changeovers in two ways. First, when water is used to push syrup to the blend unit; the MicroBlend blending system decreases the amount of water proportional to the lowering syrup brix until the blending rate cannot be maintained and automatically shuts down. All blended product in the system is at standard and can be used with maximum syrup yields.

  • Reduces downtime
  • Virtually Eliminates losses
  • Improves Product Quality
  • Limits CO2 waste
  • Variable blend rate
  • Extremely accurate proportioning
Production Specifications
Product Type Hot Fill & Cold Fill (Still Products)
Bottle Sizes diameter (1440 to 3600mm)
Rated Voltage 460/266v

Features

  • Reduces Oxygen and Nitrogen Levels in the Blended Product
  • Deaeration Occurs w/o the use of water Deaeration
  • Reduced Processing Hardware
  • Less Volatile Product at the Filler
  • Deaeration Occurs in CIP Loop
  • Carbonated Soft Drink Blenders Offer Optional C02 and N2 Injection with water deaeration and product chilling.
  • Hot Fill and Non-Carbonated Blenders are Manufactured w/o the Gas Injection, Deaeration, and Product Chilling.
  • Multi-Stream Blenders Enable the Addition of Multiple Streams of Flavors and Ingredients to the Finished Product.

Highlights

  • Reduces downtime
  • Virtually Eliminates losses
  • Improves Product Quality
  • Limits CO2 waste
  • Variable blend rate
  • Extremely accurate proportioning

CUSTOM BEVERAGE PROCESSING SYSTEM REQUEST

    • GENERAL DATA

    • FILLER DATA

    • PHONE

      Sales:  (800) 215 7115
      US:  (484) 553 9086
      UK:  +44 (0) 0800 368 9086

    • MAILING ADDRESS

      P.O. Box 285
      Kutztown, PA 19530

    • EMAIL

      sales@sourcelinemachinery.com
      info@sourcelinemachinery.com

    • OFFICE HOURS

      Mon – Fri (9am – 5pm EST)
      Sat & Sun (By Appointment)

      • This field is for validation purposes and should be left unchanged.
      • PHONE

        Sales:  (800) 215 7115
        US:  (484) 553 9086
        UK:  +44 (0) 0800 368 9086

      • EMAIL

        sales@sourcelinemachinery.com
        info@sourcelinemachinery.com

      • MAILING ADDRESS

        P.O. Box 285
        Kutztown, PA 19530

      • OFFICE HOURS

        Mon – Fri (9am – 5pm EST)
        Sat & Sun (By Appointment)

        • This field is for validation purposes and should be left unchanged.
        available 4
        Used MicroBlend Beverage Processing System
        15
        1
        SPECIAL
        available 17
        Used Sacmi SBF 408 Blow Fill Cap System
        13
        1
        available 29
        Crown 72 Valve Can Filler with Angelus 120L Seamer
        10
        Used Crown 60 Valve Can Filler with Angelus 120L Seamer
        16
        Used Crown 72 Valve Can Filler with Angelus 120L Seamer
        16
        1
        SPECIAL
        Used Sacmi SBF 408 Blow Fill Cap System
        13
        1
        This site uses cookies. Some of them are essentials while other enhance your browsing experience.