|Category||Accumulation Tables, Beverage Fillers, Bottle Fillers, Cappers - Capping Equipment, Complete Lines, Corkers, Crowners, Fillers - Filling Equipment, Inline Fillers, Rinsers|
The Micro Kombucha Filling Line can fill any bottle size from around 12 oz up to 750 ml can be handled in the same machine with a series of manual adjustments and minimal change parts.
12 oz bottles up to 24 bpm with the 4 Head, up to 30 bpm with the 6 Head, and up to 36 bpm on the 8 Head. Custom Solutions Available.
The Micro Kombucha Filling Line is a complete bottle packaging line that allows you to place an empty bottle onto an infeed table and never touch it again until you are packing it out in cases! A complete line can label the bottles, rinse out the inside, fill to adjustable fill heights, crown bottle, and rinse-off the outside of the bottle. Additional equipment can be added to the line to blow-off the rinse, align the bottles into rows that allow for convenient pack-out, or even cap or cork the bottles.
The Micro Kombucha Filler uses true pre-evac counter pressure technology to monitor bottle pressure and product pressure in controlling fills. The Micro Kombucha Filler can fill 12 oz bottles up to 24 bpm with the 4 Head, up to 30 bpm with the 6 Head, and up to 36 bpm on the 8 Head, depending on beer pressure and temperature.
Mild steel and stainless steel construction. Two-part stainless steel “steel-it” painted finish on frame. Leveling pads that allow for 2” of vertical adjustment and leveling. Stainless disk for clean contact. Tables come in a variety of sizes in 12” increments by width and length. The smallest table is 24” x 36”.
Requires 110V, 60Hz, 8 AMP power; 60 psi, 2-3 scfm air (1?4” quick disconnect) for air input). Recirculation of water requires a container and pump. Machine is adjustable for different sizes. Rinser can use city tap water run through a Carbon filter for purification; a sanitary water solution can also be used, or ionized air.
Fully adjustable 3 inch high spin belt powered by a 1/12 HP variable speed DC motor. An adjustable back wiper pad for compression of the label to the container.
Applies labels from 1” to 4-1/2” tall (optional up to 7-1/2” tall) and 14” long. Labels 1” to 5” diameter containers. 1/8” standard label gap. Accepts industry standard 3” diameter label cores. Standard feed reel size is 12”; 14-1/2” and 16” are available. PLC controlled.
Bottle Conveyors 4-1/2” standard conveyor width; 6” and 7-1/2” optional. All stainless steel construction. 32” standard conveyor height; any height optional. 72” standard conveyor length; any lengths in 6” increments optional. 1/8 hp DC gear head motor. Variable Speed Operation with total speed control through the operator interface. Spacing wheel included.
|Size Range||12oz to 750ml|
|Closure Types||Crown, Cork, Screw Cap|
|4-Head||24 bottles/min | 60 cases/hr|
|6-Head||30 bottles/min | 75 cases/hr|
|8-Head||36 bottles/min | 90 cases/hr|
Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from complete lines like this Kombucha Filling Line to entire manufacturing facility liquidations.
Click the button below to let us know what you have available.