Micro Carbonated Beverage Filling Line

Sourceline Machinery > Listings > New > Micro Carbonated Beverage Filling Line

1Video

Micro Carbonated Beverage Filling Line full

Condition	New
Category	Complete Lines
Model	4 Head, 6 Head, 8 Head
Industry	Beverage
Speed	24 BPM, 30 BPM, 36 BPM
Location	North America
Stock Number	0916-181022

Request a quote

Add to quote

Description

Micro Carbonated Beverage Filling Line

The Micro Carbonated Beverage Filling Line can fill any bottle size from around 12 oz up to 750 ml can be handled in the same machine with a series of manual adjustments and minimal change parts.

12 oz bottles up to 24 bpm with the 4 Head, up to 30 bpm with the 6 Head, and up to 36 bpm on the 8 Head. Custom Solutions Available.

The Micro Carbonated Beverage Filling Line is a complete bottle packaging line that allows you to place an empty bottle onto an infeed table and never touch it again until you are packing it out in cases! A complete line can label the bottles, rinse out the inside, fill to adjustable fill heights, crown bottle, and rinse-off the outside of the bottle. Additional equipment can be added to the line to blow-off the rinse, align the bottles into rows that allow for convenient pack-out, or even cap or cork the bottles.

Equipment List

Micro Carbonated Beverage Filler

The Micro Carbonated Beverage Filler uses true pre-evac counter pressure technology to monitor bottle pressure and product pressure in controlling fills. Micro Carbonated Beverage Filler can fill 12 oz bottles up to 24 bpm with the 4 Head, up to 30 bpm with the 6 Head, and up to 36 bpm on the 8 Head, depending on beer pressure and temperature.

Rotary Product Table

Mild steel and stainless steel construction. Two-part stainless steel “steel-it” painted finish on frame. Leveling pads that allow for 2” of vertical adjustment and leveling. Stainless disk for clean contact. Tables come in a variety of sizes in 12” increments by width and length. The smallest table is 24” x 36”.

Automated Bottle Rinser

Requires 110V, 60Hz, 8 AMP power; 60 psi, 2-3 scfm air (1?4” quick disconnect) for air input). Recirculation of water requires a container and pump. Machine is adjustable for different sizes. Rinser can use city tap water run through a Carbon filter for purification; a sanitary water solution can also be used, or ionized air.

Wrap Station

Fully adjustable 3 inch high spin belt powered by a 1/12 HP variable speed DC motor. An adjustable back wiper pad for compression of the label to the container.

Inline Labeler

Applies labels from 1” to 4-1/2” tall (optional up to 7-1/2” tall) and 14” long. Labels 1” to 5” diameter containers. 1/8” standard label gap. Accepts industry standard 3” diameter label cores. Standard feed reel size is 12”; 14-1/2” and 16” are available. PLC controlled.

Bottle Conveyors

Bottle Conveyors 4-1/2” standard conveyor width; 6” and 7-1/2” optional. All stainless steel construction. 32” standard conveyor height; any height optional. 72” standard conveyor length; any lengths in 6” increments optional. 1/8 hp DC gear head motor. Variable Speed Operation with total speed control through the operator interface. Spacing wheel included.

Technical

Micro Kombucha Filling Line

Size Range	12oz to 750ml
Closure Types	Crown, Cork, Screw Cap

Speed Rating

4-Head	24 bottles/min \| 60 cases/hr
6-Head	30 bottles/min \| 75 cases/hr
8-Head	36 bottles/min \| 90 cases/hr

Video

Line Layout

Custom Request

CUSTOM BOTTLING FILLING LINE REQUEST

Name*
First Last
Company*
Address*
Street Address City State / Province / Region ZIP / Postal Code Country

Email*
Enter Email Confirm Email
Phone*
How Did You Hear About Us*

Container Size*

ex. (12oz / include height and diameter)
Closure Size*

ex. (26mm)
Speed Requirement*

ex. 250 bpm
Lead time requirement*

Container Type*

ex. (glass, PET, aluminum, etc.)
Closure Type*

ex. (crown, plastic screw, ROPP, etc.)
Product Type*

ex. beer, wine, CSD, cider, kombucha
Need additional equipment?*
If yes please describe in comments section

Please Provide any technical specification or requirements (speed, container sizes, product type, footprint, lead time etc.)
Drawings & Technical Specifications
Drop files here or

Max. file size: 256 MB, Max. files: 3.
Upload any drawings of bottles or closures
I would like to join Sourceline's email list for future updates and specials.
- Yes
- No
Hidden
Requested Equipment
GDPR Accepted On*
- I agree to allow Sourceline to store and process the data entered into this form (For more details see our privacy policy).
CAPTCHA

Sell

Do you have a Micro Carbonated Beverage Filling Line or Similar Equipment?

Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from complete lines like this Micro Carbonated Beverage Filling Line to entire manufacturing facility liquidations.

Click the button below to let us know what you have available.

SELL YOUR EQUIPMENT

Contact

PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086
MAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530

EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.com
OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)

PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086
EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.com
MAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530
OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)