SALES
(800) 215 7115
Used SIDEL 14 Cavity Reheat Stretch Blow Molder
SOLD
| Condition | |
| Category | Blow Molders |
| Manufacturer | SIDEL |
| Model | SBO 14/20 UNIVERSAL |
| Year | 2009 |
| Industry | Beverage, Dairy, Distillery, Food, Nutraceutical |
| Speed | 19,600 BPH |
| Location | Europe |
| Stock Number | 1119-180907 |
The Used SIDEL 14 Cavity Reheat Stretch Blow Molder (Moulder) has a speed rating of 19,600 bottles per hour and delivers fast changeover times with low scrap rates as well as high oven efficiencies making this Sidel unit an exceptional choice when considering total cost of ownership (TCO). Whether it’s still or sparkling water, carbonated or sensitive drinks, sauces or detergents, Sidel’s SBO Universal blowing machines can meet the challenges of all of your food and non-food products and liquids produced in packages from 0.25 L to 3 L. This unit will accommodate a wide variety of product applications while adapting to the particular specifications of your packaging line.
14 cavities, suitable for the production of bottles from 0.25 L to 3 L, with a maximum output of 19,600 bottles per hour
This Used SIDEL 14 Cavity Reheat Stretch Blow Molder (Moulder) includes the blow wheel, oven, electrical cabinet, control panel, main cabinet, preform hopper, elevator for preforms and loader for preforms. The unit has been well maintained and is in good condition but requires a new processor or OI. With less energy consumption, lower maintenance costs, and better use of PET material, the production costs on SBO Universal blowing machines have been reduced. Combined with the blowing machine’s impressive productivity levels, these reductions lead to a drop in bottle blowing costs of up to 20 % without affecting the quality of your packages in any way.
- User-Friendly
- Quick Installation
- Improved Preform Feed
- Secure Production
- Bottle Quality Without Fail
- Lower Maintenance Costs
Sidel SBO 8/10 UNIVERSAL
| Number of cavities | 14 |
| Previously Running | 28mm PCO neck finish |
| Working Hours | 47,000 hours |
| Bottle capacity | .25 liter to 3 liter |
| Maximum neck finish diameter | 48.5 mm |
| Maximum neck height | 35 mm |
| Maximum preform height under neck | 145 mm |
| Maximum bottle diameter | 130 mm |
| Maximum bottle height under neck | 340 mm |
| Maximum base height | 51 mm |
| Electrical | 400v – 50 Hz |
Features
- Packages are closely controlled at high speeds
- Carefully controlled air consumption
- Electric components meet all European and American standards
- Sidel Preform DUMPER – Preforms are dumped automatically
- Bottle shapes especially for high speeds
- Water and air supply connections are fully accessible
- Sidel Preform feeder, hopper, preform orientor and electric components
- Last running 28mm PCO neck finish
Highlights
- User-Friendly
- Quick Installation
- Improved Preform Feed
- Secure Production
- Bottle Quality Without Fail
- Lower Maintenance Costs
Do you have a Used SIDEL 14 Cavity Reheat Stretch Blow Molder or Similar Equipment?
Allow SOURCELINE to put money back into your pocket by clearing out your Surplus Equipment or Idle Assets from single units like this Used SIDEL 14 Cavity Reheat Stretch Blow Molder to entire manufacturing facility liquidations.
Click the button below to let us know what you have available.
PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086MAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530
EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.comOFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
PHONE
Sales: (800) 215 7115
US: (484) 553 9086
UK: +44 (0) 0800 368 9086EMAIL
sales@sourcelinemachinery.com
info@sourcelinemachinery.comMAILING ADDRESS
P.O. Box 285
Kutztown, PA 19530OFFICE HOURS
Mon – Fri (9am – 5pm EST)
Sat & Sun (By Appointment)
